Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hey Guest! British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
**Upgrade Now** (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
My engine is out and i am trying to figure out how to hot wire the coil inorder to get the engine running.
My question is which way round do the wires go as the pos earth has thrown me completely.
Hi Mike, For a positive ground car and a coil marked Sw & Cb the Cb connects to the points in the Dizzy while the Sw goes to the ingnition sw. If the coil is marked + & - then the + goes to the Dizzy. and the - goes to the ignition Sw.---Cheers- Keoke
All sorted, figured out that the ignition should be neg, then found a bad connection from the insulator to the points was the problem.
Next problem is i have 3 valves stuck open so off with it's head.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.