Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I currently have my 65 BJ8 at an upholstery shop having a new Robbins top installed. I spoke with the installer yesterday and he asked a question I don't know the answer to. He says there's an inside flap where the outer flap hangs over the chrome trim at the rear of the side window. He's wondering (as am I) where this flap goes when the top is up. I've looked for pictures online but can't find one of this exact detail. If anyone knows where this flap ends up, or might have a picture to share, it would be much appreciated. Here's a photo I found online with an arrow to the spot I'm asking about and then a couple of pictures of my car with the top almost done, also showing that detail. Thanks!
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
BJ8 Top Installation Detail
- Thread starter DaeB
- Start date
Share this page
tahoe healey
Yoda
Offline
Mine is on the outside I believe to deflect water from entering the structural frame of the top. (like that would work) I am probably wrong, and I am interested in the answers you get.
tahoe healey
Yoda
Offline
I'm wrong. I guess. That makes sense.