• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

BJ8 Tool Set and Roll

Share this page

The Concours Guidelines, published by the Concours Committee, include such a description.

Assuming that your BJ8 has wire wheels with conventional "eared" knock-offs, you are in luck that there is almost nothing to the tool kit for BJ8s. A bag, a jack and one-piece handle, a tube socket and tommy bar, and a strap. And of course a knock-off hammer.
 
It's amazing how the tool kit atrophied over the years. The tools I've assembled to complete my BN2's kit are sufficent to do a complete engine rebuild!! Except that the so-called tappet spanner doesn't fit the adjusting nuts on the rocker arms...
 
Editor_Reid said:
The Concours Guidelines, published by the Concours Committee, include such a description.

Assuming that your BJ8 has wire wheels with conventional "eared" knock-offs, you are in luck that there is almost nothing to the tool kit for BJ8s. A bag, a jack and one-piece handle, a tube socket and tommy bar, and a strap. And of course a knock-off hammer.
Click to expand...

Thanks Reid, I downloaded the guidelines. What a wealth of information! Best 15 bucks I've spent in some time.

steve
 
Back
Top