Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Lutz Kramer
Jedi Hopeful
Offline
Does anybody know, if the BJ8 engines are interference engines? Those engines will be destroyed, if for example the timing chain fails, because the pistons will then hit the valves.
Lutz
Lutz
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
BJ8 Interference engine?
- Thread starter Lutz Kramer
- Start date
Share this page
Offline
I understand the intake valves extend outside the diameter of the cylinders, so on a stock engine there is no possible interference for the intake valves.
OP
Lutz Kramer
Jedi Hopeful
Offline
Thanks John, if this is true for the intake valves it might be true for the exhaust valves as well.
At least I hope so. Because yesterday I cranked the engine for a few cycles without the timing chain mounted. But fortunately I didn't hear any "bang", so I figuered the pistons didn't hit any valve. I did a compression test and everything was fine. So may be the valves really don't interfere with the pistons.
At least I hope so. Because yesterday I cranked the engine for a few cycles without the timing chain mounted. But fortunately I didn't hear any "bang", so I figuered the pistons didn't hit any valve. I did a compression test and everything was fine. So may be the valves really don't interfere with the pistons.
Last edited:
bob hughes
Luke Skywalker
Offline
Lutz
You would soon know if there was a clash of pistons and valves, do not worry, just get that hain mounted.
Bob
You would soon know if there was a clash of pistons and valves, do not worry, just get that hain mounted.
Bob
OP
Lutz Kramer
Jedi Hopeful
Offline
Is there nobody out there who really knows whether BJ8 engines are interferent or not?
I don't think it would be a good idear to just try it, because that could ruin the engine completely.
I don't think it would be a good idear to just try it, because that could ruin the engine completely.
CLEAH
Jedi Warrior
Offline
Lutz,
What Bob was saying is you would have known quite clearly if a piston hit a valve. No need to worry if you did not hear metal hitting metal! There is also no need to worry about it of you have the timing chain hooked up. I've never heard that these are interference engines.
What Bob was saying is you would have known quite clearly if a piston hit a valve. No need to worry if you did not hear metal hitting metal! There is also no need to worry about it of you have the timing chain hooked up. I've never heard that these are interference engines.
OP
Lutz Kramer
Jedi Hopeful
Offline
Thank you all for your replies. I'm glad to hear that my error will quite likely not have any consequences.