• The Roadster Factory Recovery Fund - Friends, as you may have heard, The Roadster Factory, a respected British Car Parts business in PA, suffered a total loss in a fire on Christmas Day. Read about it, discuss or ask questions >> HERE. The Triumph Register of America is sponsoring a fund raiser to help TRF get back on their feet. If you can help, vist >> their GoFundMe page.
  • Hey there Guest!
    If you enjoy BCF and find our forum a useful resource, if you appreciate not having ads pop up all over the place and you want to ensure we can stay online - Please consider supporting with an "optional" low-cost annual subscription.
    **Upgrade Now**
    (PS: Subscribers don't see this UGLY banner)
Tips
Tips

BJ8 Fuel Gauge

Frank C.

Jedi Hopeful
Offline
My fuel gauge was repeatedly sticking on full and I had to tap it to get it loose, so I (maybe mistakenly) took it apart to see if I could fix it. In the process I loosened two nuts on the back of the gauge which I found out moves the magnetic poles for the gauge.

Now I don't know how to calibrate them properly. If I knew the resistance of the sending unit I could mock it up on the bench and get things working again.

Any other suggestions?

Thanks as always.

Frank
 

TimK

Jedi Knight
Silver
Country flag
Offline
I'm in the same boat -- did the same thing for the same reason. I learned from you that the movement was of the magnetic poles. On second thought, my gauge was not stuck, it would pin on full when I turned on the ignition. I was given a lot of things to check mainly at the sending unit, but I messed with the gauge before I got to those things and messed it all up.
 

BJ8Healeys

Jedi Warrior
Country flag
Offline
Frank, it's dangerous to loosen the two little nuts on the back of the gauge if you don't know to make sure that the alignment "feet" of the two coils inside don't come out of the slots. These feet keep the coils from spinning when you re-tighten the nuts. If the coils spin, you'll break the coil wires and then the gauge is toast until you send it off for repair. How do I know?

The sending unit circuit resistance for a full tank on a BJ8 is around 90 ohms. For emtpy, it's zero ohms. You can get info on how the gauge works, and how to build a calibration rig for it here: https://mgaguru.com/mgtech/electric/fg_01.htm
This is for the Jaeger gauge in an MG, but the construction and operation of the gauges are the same as Smiths. Instead of 68 ohms for the MG, use 90 ohms.
While the test rig allows calibration of the gauge on the bench, I've found that a gauge still requires some tweaking once installed back in the car.
 
Country flag
Offline
Box it up and send it to Nisonger.

There are tasks that are rewarding to accomplish, and others that just aren't worth the time and aggrevation.
 
OP
Frank C.

Frank C.

Jedi Hopeful
Offline
Thanks Steve!!! This is just what I needed. Luckily I have a long (and so far) cold winter to get this done.

Again, thanks for your quick response.

Frank
 

fordtrucks4ever

Jedi Trainee
Country flag
Offline
Or you could learn the basics and repair yourself. I personally never bail out of trying to repair anything even if there is only a remote chance of a positive outcome. The understanding and knowledge gained is more than enough for me. Especially if time is not a significant detriment.
 
Similar threads
Thread starter Title Forum Replies Date
Lutz Kramer Fuel gauge and sender unit for BJ8 Austin Healey 2
T BJ8 Tachometer and Fuel gauge stopped working. Austin Healey 27
S BJ8 Fuel Gauge -Shows 1/4 tank when empty Austin Healey 10
G BJ8 Fuel Gauge Core Austin Healey 9
G BJ8 Fuel gauge help Austin Healey 8
Cutrog1 BJ8 Fuel Tube Installation Austin Healey 10
S BJ8 Fuel Pump Austin Healey 13
B Fuel pipe runs BJ8 Austin Healey 2
Bob_Spidell BJ8 Fuel Pump Trivia Austin Healey 0
M BJ8 Fuel pump Austin Healey 13
J BJ8 PhI ; #25805; Fuel Pump Austin Healey 20
pkmh BJ8 Fuel Tank Sending Unit - Ground Wire Austin Healey 8
Ed_K Correct SU Fuel pump for a BJ8 [ PSI specs] ? Austin Healey 9
AUSMHLY Float bowl fuel height BJ8 Austin Healey 4
N BJ8 out of fuel at 1/4 full tank Austin Healey 4
F BJ8 Fuel Filter Installation Austin Healey 14
L BJ8 FUEL TANK SPOTTED Austin Healey 2
BOBBYR BJ8 FUEL TANK Austin Healey 7
D BJ8 fuel consumption Austin Healey 5
J I need a picture of installed fuel pump for BJ8. Austin Healey 4
1 BJ8 History Trace Austin Healey 7
Patrick67BJ8 Wanted Looking for a used BJ8 switch panel. Austin Healey Classifieds 5
D BJ8 Top Installation Detail Austin Healey 3
B BJ8 Rear Backrest Hinges Austin Healey 4
S Wanted WTB: 3.5 ratio diff/pumkin for '67 BJ8 Healey 3000 Austin Healey Classifieds 0
AUSMHLY BJ8 Trans Cover Carpet Austin Healey 7
nitro BJ8 Engine Design Austin Healey 1
AUSMHLY BJ8 Carpet and Snaps Austin Healey 2
Overdrive45 BJ8 Interior Trim Austin Healey 8
nitro BJ8 Production Year Austin Healey 6
WHT BJ8 Rear Seat Surround Drain Tube Grommets Austin Healey 0
B BJ8 Seat Sliders Austin Healey 4
B For Sale 1967 Metallic Golden Beige MKIII BJ8 Numbers Matching - The Real Deal Austin Healey Classifieds 0
F Wanted BJ8 Engine Block Austin Healey Classifieds 1
BoyRacer For Sale BJ8 disk wheel hubs, spindles & calipers Austin Healey Classifieds 0
AUSMHLY BJ8 Rear Seat Squab Austin Healey 0
AUSMHLY BJ8 Differential Oil Change Austin Healey 6
S SOLD!! For Sale 1964 AH 3000 MkIII BJ8 Phase 1 Austin Healey Classifieds 2
Patrick67BJ8 BJ8 Factory Hardtop Rear Window Austin Healey 6
AUSMHLY BJ8 Clutch Pressure Plate, Old vs New Austin Healey 4
AUSMHLY BJ8 Clutch Fork Bush Replacement Austin Healey 5
AUSMHLY BJ8 Cylinder Head Installation Austin Healey 6
LAW75 BJ8 Brake Lines Austin Healey 2
AUSMHLY BJ8 Clutch Pressure Plate Brand Preferences Austin Healey 3
BoyRacer For Sale BJ8 spindles & disc wheel hubs Austin Healey Classifieds 0
G Wanted BJ8 Tonneau Cover Austin Healey Classifieds 0
Cutrog1 For Sale Healey 3000 BJ8.... a restoration saga Austin Healey Classifieds 0
AUSMHLY BJ8 Overdrive Oil Passages Austin Healey 2
Scotsman Wiring Diagram for 1966 BJ8 Austin Healey 3
A For Sale 1966 3000 Healey Blue BJ8 Austin Healey Classifieds 3

Similar threads

Top