BJ8 Differential area photos needed

[Patrick67BJ8]

I've been looking at many restored BJ8 cars so I can see the exact attachmentent points for brake, fuel line and wiring harness details, etc, but the ones I've found do not have the details I need. Trying to put my BJ8 back together on a frameup and want everything to be in the same locations as from the factory.

I think I'm 75% there but need to see more details on the P clips, etc. Need the stuff that attaches to the front and rear bulkheads plus the rear seats panel(underside).

Please send me a PM and I'll forward my personal email to you, or maybe you could post to forum?
Thanks!

 

[andrea]

Hi Patrick
Here one photo that I hope that helps
https://picasaweb.google.com/lh/photo/jkFOai9-XJtnp_XwtGjORtMTjNZETYmyPJy0liipFm0?feat=directlink
or
https://picasaweb.google.com/searunner44/DropBox?authuser=0&feat=directlink
for more example
NOTE I am not sure if my example is for Phas1 or for Phase2 BJ8
Cheers
Andrea

 

[Patrick67BJ8]

Hi Patrick
Here one photo that I hope that helps
https://picasaweb.google.com/lh/photo/jkFOai9-XJtnp_XwtGjORtMTjNZETYmyPJy0liipFm0?feat=directlink
or
https://picasaweb.google.com/searunner44/DropBox?authuser=0&feat=directlink
for more example
NOTE I am not sure if my example is for Phas1 or for Phase2 BJ8
Cheers
Andrea

Lots of great photos! The photos I need are probably the ones taken before the differential is installed. Those are the hard ones to find. I hope to see an unmolested BJ8 in a few days that may have what I need and if it does I'll be sure to make the photos available to everyone.
Thanks!