• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

BJ8 dash

Share this page

S

saltiga

Senior Member
Country flag
Offline
BJ8 dash

On the BJ8 dash there is two brackets, one each end, moss p/n633-658 item 77, end bracket set. i see from the drawing on page 108 that it attaches to the dash with two screws, how and where does it attatch to the car boby. thanks Saltiga.
 
Re: BJ8 dash

saltiga said:
On the BJ8 dash there is two brackets, one each end, moss p/n633-658 item 77, end bracket set. i see from the drawing on page 108 that it attaches to the dash with two screws, how and where does it attatch to the car boby. thanks Saltiga.
Click to expand...


HI they simply get bent [ folded ] up under the lip at the top of the scuttle.--Keoke
 
Re: BJ8 dash

Saltiga,
There are 4 bolts that attach the each windshield post to the body. The upper bolt is also used to attach the brackets you mention. Hope this helps and have a good day!

John
 
Back
Top