• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

BJ8 brake booster picture

Share this page

Marvin Gruber

Marvin Gruber

Yoda
Country flag
Offline
All brake lines are run except for brake booster. Will be rebuilding it soon. Having trouble figuring out how to mount. I have the two triangled shaped brackets that go on the bulkhead but how does the booster mount to the brackets. Am I missing more brackets? Picture please!

Marv
 
Hi Marv,

The long side of each of the (2) Girling Brake Servo mounting brackets are attached to (2) studs extending from the incline portion of the passenger side floor. The Servo is oriented with the air canister facing the engine and the smaller portion of the mount closest to the canister attached with to the hydraulic body of the servo with (2) bolts with the fender-side mount attached with (1).


Brake Sero.jpg

Have fun,
Ray(BJ8P1)
 

Attachments

  • Brake Servo Mounted 1.jpg
    Brake Servo Mounted 1.jpg
    65.5 KB · Views: 190
From a bit further back; the frame rail is parallel with the bottom of the picture, and in the background, the starter is on the left, generator and engine mount pedestal on the right.

Clearly, this is the before picture ;)

IMG_2230.jpg
 
Thanks Randy, I kept trying to mount it straight and with lines on top. Its been 7 years since the last BJ8 I restored and I didn't take this one apart. Its missing a lot of little parts and hardware
Marv
 
Back
Top