-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
BJ7 Measurement
- Thread starter big6
- Start date
Share this page
Big6:
I could have the dimensions you're requesting taken off a '62 BJ-7. It's one the early interations of that model but appropriate for later BJ-7's. FYI: The frame offers little side-to-side and front to back adjustments but vertical adjustment is accomplised by thin shims. My particular car had 3 shims on each side. GONZO.
I could have the dimensions you're requesting taken off a '62 BJ-7. It's one the early interations of that model but appropriate for later BJ-7's. FYI: The frame offers little side-to-side and front to back adjustments but vertical adjustment is accomplised by thin shims. My particular car had 3 shims on each side. GONZO.
John Loftus
Darth Vader
Offline
42-7/8" stud to stud (centerlines)on my early BJ7.
Cheers,
John
Cheers,
John