-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
BJ7 Measurement
- Thread starter big6
- Start date
Share this page
Big6:
I could have the dimensions you're requesting taken off a '62 BJ-7. It's one the early interations of that model but appropriate for later BJ-7's. FYI: The frame offers little side-to-side and front to back adjustments but vertical adjustment is accomplised by thin shims. My particular car had 3 shims on each side. GONZO.
I could have the dimensions you're requesting taken off a '62 BJ-7. It's one the early interations of that model but appropriate for later BJ-7's. FYI: The frame offers little side-to-side and front to back adjustments but vertical adjustment is accomplised by thin shims. My particular car had 3 shims on each side. GONZO.
John Loftus
Darth Vader
Offline
42-7/8" stud to stud (centerlines)on my early BJ7.
Cheers,
John
Cheers,
John