• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

BJ-7 lights on dash.

Share this page

R

robert_ellison

Jedi Trainee
Offline
What purpose does the green light in the center top of the dashbd serve?

When does the ignition light within the tach (speedo?) illuminate. I can't seem to get it to work. Suggestions?

Any suggestions how to provide more adequate lighting for dashboard. The gauges for the speedo & tach are very dim and the other gauges seem to have no illumination.
 
robert_ellison said:
What purpose does the green light in the center top of the dashbd serve?

GREEN LGHT IN CENTER TOP OF DASHBD?????

When does the ignition light within the tach (speedo?) illuminate. I can't seem to get it to work.

SOON AS THE KEY IS TURNED ON &
WHEN THE DYNAMO FAILS :laugh:

Any suggestions how to provide more adequate lighting for dashboard. The gauges for the speedo & tach are very dim and the other gauges seem to have no illumination.
REPLACE LAMPS WITH LEDS
Click to expand...
 
I replaced my dash lights with Halogens bought from the Little British Car company. Don't know if their still in business though. Downside, the lights are too bright for the dash, you can read a book by them. Or as someone said, "There really good to see that you have the right shoes on"!

Oh, you might check if you have a bulb in the ignition socket as it is a different type of socket. If you do, pull it out of the socket and turn the ignition on, no need to start the car, just turn it on. The bulb should light. If it doesn't light check the leads as usual per the wiring diagram.
 
I was going to replace all the dash and brake/turn indicator lights and license plate lights with halogen.

I read somewhere that they put out an extra amount of heat and decided I didn't need that under the dash or in the brake light/indicator light assemblies.

I installed LED's and am very happy with the results.

Regards,

bundyrum.
 
Back
Top