• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

BE Screen Washer Pump mounting

Share this page

livinginthepast

livinginthepast

Jedi Trainee
Offline
According to the parts manual, the washer pump is mounted with two nuts and a lock washer.

I have everything but the original nuts - and the only 5/8" fine threaded (24) nuts I've been able to find are too thick for this application. The originals appear to be thin (we used to call them machine-nuts). Does anyone know the specs for these nuts or whether nuts with the same specs are used elsewhere on the car - preferably ones that are available from the usual suspects? (my local lowes and home depot failed me).

BTW - Never mind the circle around the mounting cups in the image below - I'm interested in the nuts.

Thanks!

washerPump.JPG
 
I thought the nuts were 3/8 x 24.
And yes, "Stop Nuts" is the correct term, thin nuts.
check a real hardware store, they should have them.
 
If they don't, make some.
Get a couple of fat ones, and use a hacksaw in a vise, file smooth, run a bolt through from the "good" side to sort out the mangle.
 
They are 3/8-26,
Just measured a couple of units for both the od size and pitch.
Bill, do you plan on being at the ABFM in Portland next week?
Dug
 
spritenut said:
I thought the nuts were 3/8 x 24.
And yes, "Stop Nuts" is the correct term, thin nuts.
check a real hardware store, they should have them.
Click to expand...

You're right - 3/8". Sorry - that will teach me not to proof read.
 
TOC said:
If they don't, make some.
Get a couple of fat ones, and use a hacksaw in a vise, file smooth, run a bolt through from the "good" side to sort out the mangle.
Click to expand...

Think I'll try that - I've got a fresh hacksaw blade just waiting to be broken in! :smile:
 
Dug said:
They are 3/8-26,
Just measured a couple of units for both the od size and pitch.
Bill, do you plan on being at the ABFM in Portland next week?
Dug
Click to expand...

Sadly, I won't be in Portland :-( Got a house to paint. My wife told me so.
 
Back
Top