• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

BE jacking tube access holes and top bows.

xkejoe

Freshman Member
Offline
Finally getting back on the BE and have a couple of questions Can someone please tell me the diameter of the jacking tube access holes. Looks as though the jack slipped out of the tubes and screwed up the holes. Also, my top bows are a two piece affair and from what I have seen the BE original bows were one piece. Not really concerned about originality but just wondering if the ones I have will work. Thanks in advance.
 
The two piece one's came with the next generation of cars. Pretty sure they will work fine but perhaps someone has measured them to make sure they are the same. I had two piece bows on a BE and the top was too small to fit over them but I think the top had just shrunk.

Kurt.
 
Back
Top