Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
robert_ellison
Jedi Trainee
Offline
can anyone tell me how to test a fuel tank float? Either the gauge is defective or the float. I'm trying to narrow it down and not just buy them both. There is current in the line to the float.
-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
bBJ-7 testing fuel tank float
- Thread starter robert_ellison
- Start date
Share this page
Offline
Robert--
Pull the float assembly out of the tank and conect an ohmmeter across the contacts. I believe the resistance should be from 9 to 90 ohms as you swing the arm through its range.
Pull the float assembly out of the tank and conect an ohmmeter across the contacts. I believe the resistance should be from 9 to 90 ohms as you swing the arm through its range.
Randy Forbes
Yoda
Offline
If you ground the sending unit wire to the chassis, you should see "full" on the gauge. That's another way to narrow it down.