• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Battery Cables

J Eade

Member
Offline
I am replacing the battery cables in my 64 BJ8 Phase 1 and would like to know the correct cable colors. An earlier post suggested marine cable, which sounds like a good idea. Since I can get either red or black, which is which? My car is a positive ground model....is the positive cable red? Is the negative then black? Not that it matters, but would like to have degree of accuracy. Thanks.
 
Eade, all cables are black in color. To use standard color coding on a positive ground system would be a bit confusing---Keoke /ubbthreads/images/graemlins/yesnod.gif
 
Yes, original cables were black but unless you're into originality I see no reason why a positive cable should not be red.
 
Michael ,He said he wanted a degree of accuracy-so red is a /ubbthreads/images/graemlins/nonono.gif.Keoke /ubbthreads/images/graemlins/laugh.gif
 
[ QUOTE ]
Michael ,He said he wanted a degree of accuracy-so red is a /ubbthreads/images/graemlins/nonono.gif.Keoke /ubbthreads/images/graemlins/laugh.gif

[/ QUOTE ]

Not to bicker, but he said "accuracy" not "authenticity" and I read his question to mean that he did not know what wire should be red in a positive ground car were he to use red and black cables.
 
Seems there is plenty of room for confusion here. To some red = positive, to others red = hot (e.g. on the tailights of a + earth car).
 
Back
Top