• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Basic Distributer cap Question

Share this page

Tinkerman

Tinkerman

Darth Vader
Offline
My engine has been running well. When I started it up yesterday it did not run well at all. The only thing different between yesterday and the day before is that my son pulled and cleaned the spark plugs. I suspect that he got a wire messed up thereby changing the fire order. I am looking at the Lucas cap and see two things: It is a split level cap and there is no numbers embossed on the cap. My question for you is this: Are the two top firing points #'s 1 & 3 or are they 4 and 2? I have looked through most of my reference material and have not found the answer. I sure would appreciate some help on this very basic question. Thanks Tinkerman
 
Bzzt! Both are wrong. The top level should be cylinders 1 & 2.
untitled.JPG

PS, you might explain to your son that it is safer to do one cylinder at a time. That way the wires can't get mixed up.
 
And if the wires are trimmed to near minimal lengths (like Randall's picture) then they will only go on one way (the right way).

CapillaryTube_zpsf3cc1e10.jpg
 
Back
Top