Austin Healey 100 6 screw list

[Stuart1006]

Hi: Recently I bought a 1958 Austin Healey 100 6 that I am starting to restore. I have restoreed a 1953 MG TD and I remember that in the WEB I found a list of all the fasteners needed to do a proper restoration. This list included location, size, TPI etc. Is there such a list for the 100 6? Thank you very much. Stuart

 

[Johnny]

I don't remember ever seeing such a list Stuart, but I do recall wishing I had one. Now however, you can purchase original British Standard screws from various parts houses in the UK.

BTW if you need to replace the bonnet (hood) on your 100/6 I have a perfect one for sale in the 'classifieds' on this website, check it out!

 

[andrea]

This is the site where I have find the list of bolts BUT it is refered to a BJ8 1967 cars
https://www.healeyjournal.com/pages/innerbody.htm
actualy I aren't able to find the page
a copi can be discarged from J.Sims site Tecnical section Miscelaneus
https://www.healey6.com/technical.htm
I hope this help
Andrea

 

[Stuart1006]

Hi Johnny: Thank you for your prompt raply to my question. I have two hoods for my car, but thanks a lot anyway.

Stuart

 

[Stuart1006]

Hi Andres: Both links have been very helpful, thanks a lot.

Stuart

 

[BlueRidge1]

I don't remember ever seeing such a list Stuart, but I do recall wishing I had one. Now however, you can purchase original British Standard screws from various parts houses in the UK.

BTW if you need to replace the bonnet (hood) on your 100/6 I have a perfect one for sale in the 'classifieds' on this website, check it out!

Johnny,
I sent you an e-mail. I would like to purchase the hood.

Thanks
Bob

 

[stretchit2]

Stuart,

Go to British Car Specialist www.britishcarspecialist.com download their catalog and go to page 41, it might help.

Good Luck,

Jeff