• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Assistance with part identification for TR3

Share this page

C

Colin-TR3

Freshman Member
Country flag
Offline
Hi, i recently took over the restoration of the TR3 my father was working on for the last several years. I was going through a box of parts and can not identify the following item. I did a quick look through the tech manual and didn't see it in any of the diagrams. Is anyone able to ID this part? A couple different views attached. Thanks.

IMG_20250501_133030_403.jpg


IMG_20250501_133043_605.jpg
 
I don't recall seeing that anywhere on my TR3. I don't think it's original to the car It looks homemade but I can't think what the function would be?
 
Thanks for the other replies. I'll keep it handy in case i find out what it is later on. Could also be a part to a Austin Healey Mk3 as he has one of those too.
 
Stevenry said:
It is an exact match for my Revington TR boot rack hold down.

Steve
Click to expand...
That's it! I just looked at that model and the factory style Moss sells and both use these hold downs. Thanks. Now i just need to find the other half of the pair of them required.
 
Back
Top