• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR6 Assistance required with measurements please.

Share this page

M

malbaby

Jedi Warrior
Country flag
Offline
Planning to fit 6cyl into a 4A that I have recently acquired, and need some measurements.
Major suppliers do not seem to have the brackets.
Does anyone have a bare chassis and some time to make a template of the bracket that is welded to the chassis cross member.
Also measurements on their position.
 

Attachments

  • tr6 engine bay (2)_LI.jpg
    tr6 engine bay (2)_LI.jpg
    113.4 KB · Views: 131
Can’t help with the measurements Malcolm. Putting a 6 into a 4? Will that make it a TR10?
 
No there was a TR 10 a little sedan a friend had in college the first TR I ever worked on. A rare car today.

Madflyer
 
Back
Top