TR6 Anyone add Exhaust tips to standard exhaust

[wingler]

Has anyone found a nice set of exhaust tips to add a little bling to the TR6 exhaust? I believe my exhaust is the standard set up with twin exhausts side by side on the left side of the car. The exhaust pipes are oval shape (I think around 1-1/2”x2-1/4 OD) and they are slanted. Just curious if anyone can recommend something nice that is bolt on w/o modification to existing exhaust. Thanks!

 

[TuffTR250]

Here's a picture of some I put on my TR250. I put them on primarily to keep the exhaust off the chrome bumper. They taper down from the top to hopefully shoot the exhaust down toward the road. They are 2 inch inside diameter. I got them at a local parts store, I think it was Advance Auto Parts. The are held to the muffler outlet pipes with a couple of screws that tighten against the outlet pipes.
Bob

 

[glemon]

I also got extensions at the local parts store, similar, if not exactly this https://shop.advanceautoparts.com/p...HpCqvtHMrttGH2sg40N4XQ3IsV7bf2dAaAotPEALw_wcB I have dual exhaust, one exiting just inside and underneath the rear bumper guards, looks nice. Don't have a good picture handy.

 

[pdplot]

Ditto here. Been on there for 20 years and kept exhaust gases off the bumper. We used to call them echo cans.

 

[wingler]

Thanks Bob, look good!