• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Anti-sway bar for a earlier BJ7

Share this page

B

BG 62AH

Senior Member
Country flag
Offline
Guys, Does anyone know the correct diameter of a stock anti-sway bar for a BJ7. When I bought my BJ7 as a project it had a .875" dia. front sway bar that was very poorly installed. I replaced it with a used .625" dia. bar (that I thought was the stock size) and bought bushings and mounting brackets from Moss. Fitment of the .625 bar and bushing/brackets is good.....but now that I have the car on the road, I am wondering what the correct size is?

Any info is appreciated.

Thank you.
 
You now have the stock size anti-sway bar installed. However, your car will handle much better with a larger bar and BJ8 springs.
 
Back
Top