• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Anti-sway bar for a earlier BJ7

Share this page

B

BG 62AH

Senior Member
Country flag
Offline
Guys, Does anyone know the correct diameter of a stock anti-sway bar for a BJ7. When I bought my BJ7 as a project it had a .875" dia. front sway bar that was very poorly installed. I replaced it with a used .625" dia. bar (that I thought was the stock size) and bought bushings and mounting brackets from Moss. Fitment of the .625 bar and bushing/brackets is good.....but now that I have the car on the road, I am wondering what the correct size is?

Any info is appreciated.

Thank you.
 
You now have the stock size anti-sway bar installed. However, your car will handle much better with a larger bar and BJ8 springs.
 
Back
Top