• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!

    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Anti Freeze mixture

sjgcpa

Senior Member
Country flag
Offline
What is the proper mixture of anti freeze to water for a 66 BJ8? I assume all anti freeze is created equal.
 
There is no single "proper mixture".

Anti freeze provides freeze protection, corrosion inhibiting, & water pump lubrication.

Although it raises boiling point, it has less thermal conductivity than water & gives less efficient cooling.

The standard 50-50 mix provides freeze protection to around -34 degrees F. If you are in a warmer climate something like 20% antifreeze could provide some freeze protection, corrosion inhibiting, water pump lubrication, & better cooling effeciency.

If you live in a climate that doesn't freeze, something like Red Line "Water Wetter" or other corrosion inhibitor/water pump lube additives could be used without anti freeze to provide the best possible cooling.

Although some newer cars use a non-Glycol based anti freeze, I would stick with the older traditional Glycol based products.
D
 
[ QUOTE ]
There is no single "proper mixture".

Anti freeze provides freeze protection, corrosion inhibiting, & water pump lubrication.

Although it raises boiling point, it has less thermal conductivity than water & gives less effecient cooling.

The standard 50-50 mix provides freeze protection to around -34 degrees F. If you are in a warmer climate something like 20% antifreeze could provide some freeze protection, corrosion inhibiting, water pump lubrication, & better cooling effeciency.

If you live in a climate that doesn't freeze, something like Red Line "Water Wetter" or other corrosion inhibitor/water pump lube additives could be used without anti freeze to provide the best possible cooling.

Although some newer cars use a non-Glycol based anti freeze, I would stick with the older traditional Glycol based products.
D

[/ QUOTE ]
That's the best and most complete answer to your question you are ever likely to find (and the same thing I would've said /ubbthreads/images/graemlins/devilgrin.gif ).
 
Back
Top