• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Aluminum sill trim BJ8

Share this page

C

Cutlass

Jedi Warrior
Offline
Getting down to the last touches, folks. There is an aluminum trim piece that attaches to the top of each door sill, over the carpet, on the inside of the sill. My question is where and how many screws are used to attach the trim piece? Thanks. Pictures soon.
 
The screws are installed on the inside, not on the top of the trim piece.
I put one on each end and two in the middle, equal spaced. (Others may chime if more or less is correct.)

Here's a couple photos of the screws that came with the trim pieces:
 
My car is as Ausmhly states, the end screws are about 1" in and all the screws are only about 1/4" from the bottom edge of the trim piece. Have a good day!

John
 
Back
Top