Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
petnatcar
Senior Member
Offline
Hi Guys,
I think we can all agree that the brake fluid reservoir presents somewhat of a mess.
With the help of a machinist friend I was able to design a container using 2.5" x 4" aluminum tubing, which allowed me to polish the container and really brighten up that area.
It was his idea to seat the O-ring into the top edge of the container and to knurl the edge of the cover (thanks Mike).
Peter C.
I think we can all agree that the brake fluid reservoir presents somewhat of a mess.
With the help of a machinist friend I was able to design a container using 2.5" x 4" aluminum tubing, which allowed me to polish the container and really brighten up that area.
It was his idea to seat the O-ring into the top edge of the container and to knurl the edge of the cover (thanks Mike).
Peter C.
