• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

After Market ignition opinions

Share this page

Don't know if it's worth the price, but
the GM HEI technology is just about idiot
proof... One draw back will be the upper
rpm limit for it, the GMs I've dealt with
won't go much past 6Krpm without some mods...
 
Hi Robert, From discussions I've read about GM-HEI on an MG the only question was if it was properly curved for the HP that your particular set-up is producing (although it seems to make so little difference the same dizzy is used with single or dual carb set-ups)-probably is more important for high performance interests. Faced with a similar decission, after much research I went with Brit-Tek's Ultimate ignition kit for a couple hundred bucks less (with Pertronics a little more) and have been very happy. FWIW
Tim
 
Back
Top