• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Adjusting Rer Brake of BN6

Share this page

BN6_2197

BN6_2197

Jedi Trainee
Country flag
Offline
Gents,

I read the instructions of the workshop manual (Section M) for adjustinge the rear brakes. Is it corret that I have to remove the brake drums to get access to the adjuster (#11 of the attached picture). If this is true how to adjust them "hard"? When adjusting the front brakes I can use my ears for adjustment since brake drums do not have to be removed.

IMG_4956.jpg

Regards,

Volker
 
Hi Volker,
No, you do not have to remove the drum. The adjuster #11 has a small, 1/4" or 5/16" I think, square extending out thru the backplate. You can just make out the square on the bottom (in the orientation of the picture you attached). On you car, look at the outside of the backplate opposite the wheel cylinder and you will see a small square.
Dave
 
Dave, you are totally right. I just misinterpreted the workshop manual. Thank you very much for your quick response. Volker
 
Back
Top