Had very bad light on my BJ8 when driving at night time. Decided to replace the sealed beam lights with H4 halogen. It didn't give the improvement I expected.
Checked the setting of the lamps and they were pointing 5-6% downwards even with the adjusting screw fully in.
Had to shim up both headlights with three washers on each lower screw to get them to around 1.5%.
Is that to be expected?
Checked the setting of the lamps and they were pointing 5-6% downwards even with the adjusting screw fully in.
Had to shim up both headlights with three washers on each lower screw to get them to around 1.5%.
Is that to be expected?
Hi Guest!
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 


that will sure do it---Keoke