• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Adhesives for dash and seats.

Share this page

Jim - don't know about best, but I used 100% silicone auto sealant.

Edit: used it on the dash pad.

Tom
 
For the dash pads I used a 3M spray adhesive for the area where the top pad attaches to the body. Very little is needed as the whole thing is pretty much clamped into place once the windscreen is remounted.

On the seats... are you thinking of using an adhesive between the foam and the cover? I don't think Triumph used an adhesive their... indeed the seats bottoms can be secured with no adhesive, just the clips around the bottom edge of the seat frame.

My comments are from experience on a TR4 which may or may not be similar to your needs.
 
77 never dries and stays sticky, 90 dries to the touch and last longer and is stronger. Won't last forever on fabric back wallcovering. They make a spray just for foam. It is the better product,if you going to use it.
 
Back
Top