• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Accumulator housing

Share this page

D

davmar1960

Freshman Member
Country flag
Offline
Can I use the accumulator housing along with all related parts say moss # 866-320 to replace 866-310 piston which is NA right now which is 1.750 . Thanks
 
Yes. I changed the "large" accumulator used on TR3 and solid axle TR4s to the "small" accumulator used on the IRS cars. It is mentioned in the excellent Buckeye articles on the A Type OD. I found the parts were cheaper from Rimmer. The pressure for the small accumulator is 450 psi vs 360 psi for the large one.
> Gearbox — Buckeye Triumphs <
Berry
 
Back
Top