• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Accumulator housing

Share this page

D

davmar1960

Freshman Member
Country flag
Offline
Can I use the accumulator housing along with all related parts say moss # 866-320 to replace 866-310 piston which is NA right now which is 1.750 . Thanks
 
Yes. I changed the "large" accumulator used on TR3 and solid axle TR4s to the "small" accumulator used on the IRS cars. It is mentioned in the excellent Buckeye articles on the A Type OD. I found the parts were cheaper from Rimmer. The pressure for the small accumulator is 450 psi vs 360 psi for the large one.
> Gearbox — Buckeye Triumphs <
Berry
 
Back
Top