• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

A Quiet 1500 Trans !?!?!

Share this page

B

blkcorvair

Jedi Knight
Offline
Got the Bondo Buggy Re-assembled and Running again tonight. After drilling and re-tapping the Brake Light switch hole on the trans. (Always a last second curve ball to change your evening plans.) I swapped out the Trans that worked fine but was leaking everywhere. Steam cleaned an extra that someone had given me, Threw soem black rustoleum on it and re-sealed as much as I could. Also changed the top cover vent. Got her back together and took it for a spin. To my surprise the trans is silent! I am almost worried. I have never heard a 1500 trans that didnt growl in 1st.
IMG_1475.jpg

Also mounted the wheels I re-painted with some new rubber. Starting to look good. Cant wait to get it on the highway!
 
Are you sure you remebered to put the transmission back in?

/bcforum/images/%%GRAEMLIN_URL%%/devilgrin.gif
 
Mines quiet...

oh wait, mines a Nissan... /bcforum/images/%%GRAEMLIN_URL%%/wink.gif
 
I need more info on the blanking plates you made for the front turn signal holes!!! Have been pondering doing the same, rather than trying to find rust-free 70-74 fenders. Details?

-Duncan
 
Looks like some kind of mesh riveted from the outside?
Did you use some kind of off the shelf material?

Oh - there was a box on my front porch when I got home...
Haven't opened it up yet, but there's only one thing that big that I expected today /bcforum/images/%%GRAEMLIN_URL%%/wink.gif
 
Blanking plates were chosen for a few reasons. Foremost being this was suppossed to be my parts car and I told my wife it wouldnt cost me much to get her road worthy for a while. Second I have an oil cooler on one side and small radiator on the other that needed some protection from rocks.

SO I wnet to Home Depot picked up a package of gutter gaurd mesh screens, Cut the approximatally the correct size, Primed and painted with Rustoleum Stainless Steel Paint, Clear hold up to back side, Rivet from Front Side. And WHALA!

Now I am searching for a sprite grille to replace that homeade grille that this car came with. (I Love what Youve done with Frank) and perhaps a set of Lucus Jaguar Round Turn signals to replace those $2 Marker lights and that May finish my front end.
 
Look at this one:
Midget grille

Oh, also take a look at my thread about the new exhaust unit.
 
have checked that one out however I would like something I can transfer to my Race car later and thats just to slow looking for me. I do love the silver grille look tho.
 
Back
Top