• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

A good use for Alumaloy?

Share this page

ChrisS

ChrisS

Jedi Knight
Country flag
Offline
I've seen the commercials and if what they say is true I should be able to get the engine running again with a propane torch and a file. What are your opinions on this approach?

Piston3_Small.JPG


The following shows the piston after a piece that was wedged in was removed

Piston_Small.JPG


Piston2_Small.JPG


And some cracks

Piston_WP_Small.JPG


Piston_Skirt_Small.JPG


If I run out or rod I'll just fill in the gaps with the chunks from the oil pan and intake manifold. /ubbthreads/images/graemlins/devilgrin.gif
 
Man, really ate that up.
 
That's impressive!

I was thinking super glue myself, or maybe some bondo? /ubbthreads/images/graemlins/devilgrin.gif
 
It will only be stronger, thicker deck on the top of the pisto n when you are done. Might I suggest a Sawzall to re-cut the ring grooves. Phil
 
I love it! Sawzall ring groove tool!! YEEha!

Let us know how that Alumaloy patch works fer ya, Chris. /ubbthreads/images/graemlins/devilgrin.gif

That's pretty dramatic failure. Sheesh. Actually, it's a wonder to me the things work ~at all~ for over ten minutes! Magic.
 
You can't use a sawzall for new ring grooves, the blade is not wide enough.
Use the angle grinder with a metal cut off wheel, it's the perfect size.
 
Back
Top