-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
948 piston rings
- Thread starter 59Bugeye
- Start date
Share this page
aeronca65t
Great Pumpkin
Offline
Call ARP...they should have them.
Their website is awful, but it'll give you an idea of what they have and their contact info:
https://www.aptfast.com/
Their website is awful, but it'll give you an idea of what they have and their contact info:
https://www.aptfast.com/
Hap Waldrop
Yoda
Offline
If APT doesn't work out for you, then you may try a company like Total Seal that works with bore sizes, now mind you, there's not alot of choices for a bore size that small. TS would nned to knoe how deep the ring lands are (radial depth) and tall they are (width).
""""""Does anyone know where I could find .010 over rings for stock 948 pistons""""""
what are U trying to do here......maybe file fit the rings and a standard set has too much gap?
your quest doesn't make sense.....either that or I dont understand what your doing??
Other sources might be Grant or Hastings, but you wont find a .010" set.
what are U trying to do here......maybe file fit the rings and a standard set has too much gap?
your quest doesn't make sense.....either that or I dont understand what your doing??
Other sources might be Grant or Hastings, but you wont find a .010" set.
