• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

85 Honda dash lights

Share this page

eejay56

eejay56

Jedi Warrior
Offline
My 85 Honda Accord has no instrument lights. The wiring diagram shows the control pot is connected to a box called Dash Light Control which connects to the dash lights but no indication where it might be. anybody know where it is? I'm pretty sure that's where the problem is because all other lights work and the control pot is OK but has no voltage going to it. I hope it's not buried up under the dash.
 
/bcforum/images/%%GRAEMLIN_URL%%/savewave.gif
EJ
The box on the dash that dims the dash lights is the problem.
Pull it from the dash, (held in by spring clips, just get a small screwdriver on one side and pry it out) and remove the wire harness plugged in the back. Should be a three wire plug. One wire is live and then just jump to one of the others until the lights come on. It has been about ten years since I've seen one so I can't remember the colors, SORRY!
If you need to know anything else, let me know, (25 years working on Hondas)
Dave
P.S. you will not be able to dim the dash lights but they will be on
 
Unfortunately none of the wires is live.
 
SORRY!!!!
Should have said one would be live when the lights are on.
My how I forget the little things as I get older!
/bcforum/images/%%GRAEMLIN_URL%%/wall.gif
Now you can give me lashes.
Hope this helps
Dave
 
14dna said:
the lights are on.
Click to expand...
... but nobody's home /bcforum/images/%%GRAEMLIN_URL%%/jester.gif my problem exactly! /bcforum/images/%%GRAEMLIN_URL%%/crazyeyes.gif
 
I knew that the lights had to be on. None of the three wires going to the dimmer control is hot when the lights are on. Jumping those has no effect I also tried jumping various known good 12v and ground wires to the control line.
 
I found the box hanging off the fuse block. Disconnected it and grounded the output line to the lights. Now they work.
 
Back
Top