Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
kyreb1862
Jedi Knight
Offline
It seems things never go the way I want them to. I got the drivers side mount loose without any problems. I already had the steering rack out of the way so getting to the 9/16 nut was easy enough. Nut came off no problem. Then I moved to the passenger side and the trouble started. The nut on that mount refuses to break loose and to make things worse the mount is tearing loose from the mounting plate. At this point it seems my only options are to take the trusty sawzall and either cut through the rubber part of the mount or it looks like I could possibly take the sawzall and cut off the end of the stud with the nut on it. I already have the cross member off for painting so I have a little extra clearence in the area. Am I on the right track or do some of you guys have am better idea. All opinions welcome.
Regards John
Regards John
