• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

TR6 '76 TR6 stromberg rebuild gaskets??

Share this page

wangdango

wangdango

Jedi Hopeful
Country flag
Offline
Have been rebuilding these carbs (rebuild kits from V British), the kit did not contain the gaskets for the by pass valve gaskets for the small brass thing a ma jing.. The old gaskets are shot. TRF seems to have the same kit, what do I do?
 
wangdango, I would give VB a call and explain what your problem is. If they are no help, Moss sells the gaskets one by one, $6 bucks should get both, but they will stick it to you on the postage. Still not as bad as having to get new kits. Give me the number of the moss gasket and I will see if I have a couple.
 
The brass thing is the actual Throttle Bypass Valve. It should be attached to a rubber like flexible diaphram that surrounds the brass valve. It, along with the 2 needed gaskets, are sold seperately as the "Bypass Valve Diaphram" VB# 3-6310 and usually found at BPNorthwest, too
 
Back
Top