• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 76 TR6 electric fuel pump?

Share this page

wangdango

wangdango

Jedi Hopeful
Country flag
Offline
Would like to do away with the stock pump, (it needs a rebuild, and as the car does not get much driving, tends to run the battery down). SO, want to make a plate to block off the hole and install a electric Facet pump. Any one done this? Ideas, on location, wiring, etc?
 
Install pump near and below tank. Electric pumps push fuel better than they pull. I am putting one one my GT6. Making block off plate out of aluminium and am going to attach a bi-pass regulator at that location. I am using a bi-pass regulator to help keep vapor lock down. install an inertia switch to cut off pump in event of accident.

Jim
 
hot rod shops sell chebby block off plates, fit on the 6 engine..
 
Frank Fischer makes a plate that's a perfect fit and doesn't cost much.

DSCF0025%20(Small).JPG
 
Back
Top