• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Spitfire 76 spitfire diff replacement

Share this page

D

Dan76spit

Senior Member
Offline
hi all,
i am replacing my rear diff and i am having a hard time getting the two rubber washer that go on the outside of each of the rear ears. there is just no way i can get the diff in with these on the sides. i can get it in without them, but just barely its still very tight. do i need them? they dont seem to serve any purpose. i cant even find these in the parts catalogs to buy new ones- i was just going to re-use the old ones but i cant get the diff in using them. my new diff has all new bushings in the ears and a poly set for the front mount.
thanks just wondering...
 
I am by far an expert on them but I've torn several of them apart and havn't ever seen any rubber washers that go along with the bushings in the ears of the diff. Doesn't mean that there wern't any ever installed though. I'd say try it without them if you can't get them to fit and see what happens.
 
Dan, I wouldn't worry about them; just install without them.

The 1500 part catalogue does show these two rubber washers, part# 149648.
 
Back
Top