• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

73 Midget transmission mount center lower does it have to be pinched into the mounting bracket?

Share this page

OP
fordmstr

fordmstr

Freshman Member
Bronze
Country flag
Offline
Replacing all of the engine and transmission mounts, the center lower transmission mount bracket had to be straightened to install the new center lower transmission mount. The old one was pinched into the mounting bracket from the factory. Was having trouble replicating it by bending over the mounting bracket. It seems to fit fairly tight into a rectangular mounting space. Every time I tried to bend it started to pop out of the mounting bracket.
Has any one had this problem before?
 
Sort by date Sort by votes
Ended up installing the transmission with the lower center transmission mount pushed into the rectangular bracket. It fit snug but gave up trying to squeeze it any tighter. Not sure if that is a fix but that's what I did. Talked with Bob Forsblom, who rebuilds MG transmissions and lives in Columbus Ohio. He said that some people don't even install that lower center transmission mount, just leave it off.
 
Upvote 0 Downvote
Back
Top