Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Stewart
Darth Vader
Offline
My fuel system was hacked badly by a dpo and I'm getting ready to fix it. The fuel lines and electrical were hacked to fit another fuel pump. First off does anyone have a picture of the correct setup. I have a pretty good idea of what needs to be done but a picture makes life so much easier.
Please correct me if I'm wrong but as I understand the setup the hard-line runs from the tank directly to the pump via an adapter then a flexline with a banjo fitting goes from the pump to the hard-line that goes to the carbs?
Also does anyone have a source of the hard-line to pump adaptors or am I better off going with moss's hacked fuel line kit?
Please correct me if I'm wrong but as I understand the setup the hard-line runs from the tank directly to the pump via an adapter then a flexline with a banjo fitting goes from the pump to the hard-line that goes to the carbs?
Also does anyone have a source of the hard-line to pump adaptors or am I better off going with moss's hacked fuel line kit?