• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

MGB '71 MGB Front End Rebuild

Share this page

OP
G

Guffyfish

Freshman Member
Country flag
Offline
I got my B running so now I get to embark on the journey to make it safe and handle well. Going into a front end rebuild the big hurdle I'm seeing is the king pins. There's a little verticle wiggle in the left (driver's) side and almost a 1/16" on the right so I'm guessing they're toast. Given that does anyone where I can get bushes reamed in the Portland area, or if I have to ship them somewhere further?

Any other thoughts on the front suspension?
 
Sort by date Sort by votes
Just a thought, but have you checked out any local MG/Brit car clubs in the area? Some clubs have the ream to hand around to members when needed, saves a lot of time & money.
 
Upvote 0 Downvote
DrEntropy said:
Just a thought, but have you checked out any local MG/Brit car clubs in the area? Some clubs have the ream to hand around to members when needed, saves a lot of time & money.
Click to expand...
That's good to know, I'll try and look for some of that. Little scared to try and ream my own bushings because it sounds pretty easy to mess up but if if the reamer's attainable I'm more inclined to try.
 
Upvote 0 Downvote
Back
Top