• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR6 69 TR6 emblem

Share this page

I

ichthos

Darth Vader
Country flag
Offline
I finally got around to reinstalling the front emblem on my grill. My car was originally missing part of the grill and emblem, so I picked one up fairly cheap on Ebay. I mention this because I don't know if these varied from year to year. My problem is that after putting in a new center screw, it seems sort of wobbly still. It almost seems like it should have two rubber inserts on the grooved part that goes against the grill. Am I missing parts?
Kevin
 
I recently took mine off and there was no rubber grommet on ether end. However mine had been gone through before so not a good example. Looking in Moss and TRF catalogs there is no rubber grommet. The only difference I know of in the emblems is the black in early ones were cloisonne and the later ones were stickers (after 1974). You might be able to add a few extra washers behind the bolt head to pull it away from the threaded boss. The bolt might be a hair too long and is bottoming out not letting you tighten up the badge to the grille.
 
Back
Top