zimasprite
Jedi Hopeful
Offline
Literally, I used a tow bar and brought it home with me. I'm the proud new owner of a 68 sprite. I picked it up for very little money and it has some really good parts. At first I thought about using it as a donor for my 62 that is just getting started. Instead, I'm going to use this baby that I got for a few hundred to do my learning on. I've never done filler work, so here's my chance to learn. Most, if not all but some on surface, of the rust has already been removed. What's left needs smoothed over and straightned with filler. Then I'll try my hand at painting...hey, what's to lose. The engine and tranny work already, so that's a plus. Smokes a little for about 30seconds, but starts right up. All of the glass for windshields is good. I think the hard part is going to be figuring out what little bolt, piece goes where. I have a bunch of boxes. Then, it'll be hard to find the right bolt to use. Anyways, I took some pictures, so if I can figure out how to post I will.
-Drew
-Drew