Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
BugeyeNJ58
Jedi Hopeful
Offline
Ready to reinstall the wiper motor and cable back into the 59 Bugeye. I removed it to install a separate clutch and brake cylinder setup.
(1) what's recommended to lube the cable
(2) how do I slide it past the wipere arm gears? Do I just remove the wipers? Looking for easiest way. Don't want to get upside down and remove the wiper
arm mechanisms.
Personally, I think that RainX is good enough on these small windshields, but sometimes you do need to get bug guts out of the way.
Thanks..
(1) what's recommended to lube the cable
(2) how do I slide it past the wipere arm gears? Do I just remove the wipers? Looking for easiest way. Don't want to get upside down and remove the wiper
arm mechanisms.
Personally, I think that RainX is good enough on these small windshields, but sometimes you do need to get bug guts out of the way.
Thanks..
