Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I've seen other posts regarding this problem. What I found involved the inner surface of the retainer ring that holds shifter lever in place. When attempting to move lever into reverse the lever was touching the inner surface of the retainer ring disallowing the lever to reach the full bottom position . I removed the ring and with a barrel grinder I removed enough material to allow for a small space between the two surfaces. Now able to back up with no issues.
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
59 Bugeye rib cage tranny hard shift into reverse
- Thread starter rossco
- Start date