-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
T-Series 55 TF Floorboard screws
- Thread starter PAUL161
- Start date
Share this page
Offline
Probably 1/4 x 26 with the cupped washer.
You might get a 1/4 x 28 to go.
You might get a 1/4 x 28 to go.
OP
Offline
Found out the screws are 1/4 BSF x 1" and are on order from British Tools & Fasteners. Plus I ordered the last two BSF square nuts they had. The rails in the center have a couple bad nuts, buggered before I got the car and just getting around to welding new ones in place. Would have replaced all, but they ran out of square nuts. Thanks guys for the help! 
PJ
PJ
Offline
Hopefully you have the correct washers for the flat head screws?
OP
Offline
Thanks for the reminder, but I have all I need plus extras.
