-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR4/4A 4A chrome headlight rim installation?
- Thread starter karls59tr
- Start date
Share this page
TR3driver
Great Pumpkin - R.I.P
Offline
What worked for me on my 3A (similar rings but wider) was to turn the removal tool around backwards and slide it in between the trim ring and bulb retaining ring, so I could push directly on the tab that engages the spring clip. Of course you also have to be careful to get it lined up right.
If the ring is new, match it up to make sure the tab is in the right place relative to the clip at the top. I got a pair once that were simply made wrong, the manufacturer had put the rivet for the clip through the drain hole instead of where it should have been. TRF replaced them promptly, but confirmed that the whole batch was made wrong.
If the ring is new, match it up to make sure the tab is in the right place relative to the clip at the top. I got a pair once that were simply made wrong, the manufacturer had put the rivet for the clip through the drain hole instead of where it should have been. TRF replaced them promptly, but confirmed that the whole batch was made wrong.
