roofman
Jedi Knight
Offline
Thanks to you guys for the help in wiring my 3rd brake light. Here is a picture of the install. Both lights work but the picture looks like only 1 is on.
What I did was:
Roll bar is cosmetic only, had a friend at a muffler shop bend a piece of tailpipe and weld floor flanges to bolt to floor.
Bought a roll bar cover on ebay for $22
Bought a piece of 1"square aluminum square tube.
Bought 2 end caps. Bought a Triumph nameplate on ebay $8.
Bought a set of universal Hyper-lites on ebay for $25
And put it all together. My Miata seats set all the way back do not allow for the standard rollbar so although mine is cosmetic only, I think looks good and serves a function. The Hyper-lites flash for a few swconds then stay steady on while foot is on the brake.
What I did was:
Roll bar is cosmetic only, had a friend at a muffler shop bend a piece of tailpipe and weld floor flanges to bolt to floor.
Bought a roll bar cover on ebay for $22
Bought a piece of 1"square aluminum square tube.
Bought 2 end caps. Bought a Triumph nameplate on ebay $8.
Bought a set of universal Hyper-lites on ebay for $25
And put it all together. My Miata seats set all the way back do not allow for the standard rollbar so although mine is cosmetic only, I think looks good and serves a function. The Hyper-lites flash for a few swconds then stay steady on while foot is on the brake.
Hey Guest!
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 