3000 Rally Grille Installation

[Bruce]

Greetings. I just ordered the rally grille from AH Spares, which does not come with fitting instructions. If anyone has installed one, I would greatly appreciate any tips, direction and photos on the process. Many thanks.

 

[Healey Nut]

Grab a cold one or two …..happy reading .see how I did it . Patience is a virtue and you will need it . Page three is where the details are .

Tri-Carb Project

Things are moving along at the paint shop. It should be getting some primer in the next few days. Can you tell me why the grill surrounds are installed before painting? Thanks, Pete

www.britishcarforum.com

 

[Bruce]

Grab a cold one or two …..happy reading .see how I did it . Patience is a virtue and you will need it . Page three is where the details are .

Tri-Carb Project

Things are moving along at the paint shop. It should be getting some primer in the next few days. Can you tell me why the grill surrounds are installed before painting? Thanks, Pete

www.britishcarforum.com

Looks great. How is the mesh for the oil cooler grille attached behind the shroud?

 

[Bruce]

Grab a cold one or two …..happy reading .see how I did it . Patience is a virtue and you will need it . Page three is where the details are .

Tri-Carb Project

Things are moving along at the paint shop. It should be getting some primer in the next few days. Can you tell me why the grill surrounds are installed before painting? Thanks, Pete

www.britishcarforum.com

Looks great. How is the mesh for the oil cooler grille attached behind the shroud?

I received the rally grille from AH Spares, which came as an assembled unit. I clicked on your response but I I don't find a page 3. Can you tell me how you installed the grille? I can't see any way it goes in as a unit.

 

[Healey Nut]

The thread has nine pages all accessible . Open up the thread and pic a page top left of the thread is where the pages are

 

[Bruce]

The thread has nine pages all accessible . Open up the thread and pic a page top left of the thread is where the pages are

Got it, thanks! Seems like it would be much easier with the shroud off, but the pictures are very helpful. Mine arrived damaged--the ends of the "sugar scoops" are bent inwards like dog ears. I'm assuming this happened in shipping. I'll be contacting AH Spares in the morning. And clearly I have to drill out the pop rivets and reassemble the ducting piece by piece.